下面的內容是對于CRS3000型通用款試驗臺的事項闡述，所展示的高壓共軌試驗臺都是現場拍攝，提供的內容都是經過泰安市泰山區精達動力機械制造廠噴油泵試驗臺廠家經驗所得，請點擊進入查看更多液壓泵試驗臺的相關行業信息吧。

• CRS3000型通用款試驗臺該款試驗臺主機傳動采用變頻無級調速；集試驗臺的完善技術和新型共軌的結合，既可以檢測普通的機械式噴油泵，也可以實現共軌油泵、共軌噴油器及電控調速器油泵。通過控制系統用戶可以設定控制參數，試驗臺模擬ECU輸出燃油噴射控制信號，驅動共軌高壓泵和共軌噴油器協同工作。本控制系統的噴油器驅動信號脈寬及頻率可調；短路保護功能；可以實時測量軌道壓力，并具有高壓保護功能，電控油泵的測試科根據用戶需要附加。該設備的標準功率為15KW。

  CRS3000型通用款試驗臺可測試BOSCHCP1,CP1-H,CPI-K,CP2,CP3,DELPHI, BOSCH、SIEMENS、DELPHI、DENSO等高壓共軌噴油泵,BOSCH(博世),DELPHI(德?tīng)柛?，SIEMENS(西門子)，DENSO(電裝)等噴油器。

  特點：

  01、多段電壓輸出自動控制，滿足不同共軌噴油器的驅動要求

  02、LCD液晶顯示高壓共軌噴油器噴射頻率，驅動脈寬自動控制

  03、自動控制待試噴油泵的流量調節閥，控制待試噴油泵的流量

  04、自動實現油軌壓力、精度高達到±1MPa

  05、開環或閉環控制方式手動可選

  功能介紹：

  01.測試不同轉速下的各缸供油量

  02.靜態檢查各缸供油的時間

  03.檢查調速器性能

  04.分配泵電磁閥的試驗

  05.檢查氣動調速器性能

  06.檢查增壓補償器性能

  07.檢查分配泵的輸油供油能力

• 

• 08.測量分配泵泵體內壓

  09.檢查氣膜調速器負壓性能

  10.進行噴油泵的密封性試驗

  11.測量提前器提前角度

  12.測量高壓共軌噴油器的油量；

  13.測量高壓共軌噴油器的啟動油量；

  14.測量高壓共軌噴油器的回油量；

  15.測試軌道壓力

  16.測試共軌噴油器的噴油壓力

  17.測試共軌噴油器的噴霧錐角

  18.測試共軌噴油器的噴霧均勻性

  19.測試共軌油泵的密封性

  20.測試共軌油泵的供油壓力

• 21. 測試共軌油泵的回油量

  22 電控直列泵 轉子泵的測試。（可選）

• Crs3000 general-purpose test bench the main engine of this test bench adopts variable frequency stepless speed regulation; Combined with the perfect technology of the test-bed and the new common rail, it can not only detect the ordinary mechanical fuel injection pump, but also realize the common rail oil pump, common rail injector and electronically controlled governor oil pump. Through the control system, users can set control parameters, and the test bench simulates ECU to output fuel injection control signals to drive the common rail high-pressure pump and common rail injector to work together. The pulse width and frequency of the fuel injector driving signal of this control system are adjustable; Short circuit protection function; It can measure the track pressure in real time and has the function of high-pressure protection. The testing department of the electric oil pump can add it according to the needs of users. The standard power of the equipment is 15kw.

• Crs3000 universal test bench can test boschcp1, cp1-h, cpi-k, CP2, CP3, Delphi, Bosch, Siemens, Delphi, Denso and other high-pressure common rail fuel injection pumps, Bosch (Bosch), Delphi (Delphi), Siemens (Siemens), Denso (electrical installation) and other fuel injectors.

• characteristic:

• 01. Automatic control of multi-stage voltage output to meet the driving requirements of different common rail injectors

• 02. LCD liquid crystal displays the injection frequency of high-pressure common rail injector, and the driving pulse width is automatically controlled

• 03. Automatically control the flow regulating valve of the fuel injection pump to be tested to control the flow of the fuel injection pump to be tested

• 04. Automatically realize fuel rail pressure with high accuracy of ± 1MPa

• 05. Open loop or closed loop control mode can be manually selected

• Function introduction:

• 01. Test the oil supply of each cylinder at different speeds

• 02. Statically check the oil supply time of each cylinder

• 03. Check the governor performance

• 04. test of distribution pump solenoid valve

• 05. Check the performance of pneumatic governor

• 06. Check the performance of boost compensator

• 07. Check the oil delivery capacity of the distribution pump

• 08. Measure the internal pressure of the distribution pump

• 09. Check the negative pressure performance of the air film governor

• 10. Conduct the sealing test of the fuel injection pump

• 11. Measure the advance angle of the advancer

• 12. Measure the fuel quantity of high-pressure common rail injector;

• 13. Measure the starting oil volume of high-pressure common rail injector;

• 14. Measure the return oil volume of high-pressure common rail injector;

• 15. Test track pressure

• 16. Test the injection pressure of common rail injector

• 17. Test the spray cone angle of common rail injector

• 18. Test the spray uniformity of common rail injector

• 19. Test the sealing of common rail oil pump

• 20. Test the oil supply pressure of common rail oil pump

• 21. Test the return oil volume of common rail oil pump

• 22 test of electric control in-line pump rotor pump. (optional)

• 英文由百度翻譯，僅供參考。